| IISO9001 acquired. |
![]() |
| January, 2005 |
| ■TCP PROGRAMMABLE PULSE GENERATOR N210-1026T |
| The N120-1026T is suitable for systems that need various pulse sequences, such as NMR, ESR, and supersonic measurment. |
| Pulse conditions are set with TCP/IP. The N120-1026T can configure the sutomatic measurement system with external control software. The same commands as the Pulse generator N210-1026S can control the N120-1026T. |
![]() |
| ■Set in the TCP/IP (5025 port) |
| ■LAN connection |
| ■Output ports:16 (Expandable to 32) |
| ■The available commands made by our GP-IB pulser(N210-1026S) |
| Output ports | 16 (Expandable to 32) |
| Output level | TTL |
| Internal clock | 40MHz |
| Each pulse width | 100ns - 1s |
| Each pulse interval | 100ns - 36,000s |
| Repeat & pause time | 1ms - 36,000s |
| Each pulse resolution | 25ns |
| Output connector | BNC-FEMALE (Expansion 16CH: Multi-core connector) |
| Interface | LAN |
| Phase synchronization input | 10MHz±0.1MHz /0dBm |
| External trigger input | TTL rising edge detection, Minimum pulse width of 1µs or more |
| Command control | TCP/IP No.5025 port |
| Power supply | AC100V - 220V 50/60Hz 1φ Less than 10VA |
| Shape | 19 inches rack case (EIA 1U) |
| Size | 480(W)x44(H)x250(D) (mm) |
| Weight | 2.4kg |
| Outline drawing (PDF) | Japanese manual (HTML) |